Used for shimming slate. Made from maple hardwood.
L. 6" x W. 1/2" x H. 5/16"
2046 Wide, Long Wood Wedges Coming Soon
L. 6" x W. 1" x H. 5/16"
2050 Small Wood Wedges, Bag of 50
2052 Small Wood Wedges, Bag of 100
Used for shimming slate. Made from maple hardwood.
L. 2" x W. 1/2" x H. 5/16"
2054 Flat Shims, Bundle of 50
Wood floor shims. 3 1/4" x 4" and only 1/32" thick.
3" Rubber Flat Shims
Non-slip leveling rubber shims that are easily cut for custom installations. Keeps your billiard table level and secure even on hardwood floors.
2080 1/32" thick, bag of 50 2082 1/16" thick, bag of 50
2084 1/8" thck, bag of 50 2086 1/4" thick, bag of 25
2056 Wood Featherstrips
Feather strips are used on non-tavern tables to help attach billiard cloth on the top of rails. 54" x 1/4" x 5/16" very clean basswood strips. Set of 6
2055 Rubber Featherstrip
Available in 27 ft. package. Enough to do a 9 ft. or smaller table. Also available by the foot.
2053 Plastic Featherstrips
48" x 1/4" x1/4" black plastic strip. Set of 6
6108 Tweeten Fibre Block
Used to pound featherstrips into rails without damaging or cracking the wood.
1050 1 lb. 100% Pure Beeswax 1051 1 oz. 100% Pure Beeswax
Used to fill the seams on a three piece slate table. Available in
1lb. bar or 1oz. bar.
5001 Duo-Fast Stapler Model EWC-5018A
Drives fine wire, 1/2" crown staples. Side loading magazine holds 84 staples. Weighs only 4lb., 3oz.
Staples, 5000/box
Galvanized wide crown (1/2") chisel point staples. Use with Duo-Fast 5000 Series Staplers; CS-5000, DWS-5020, Sure Shot 5020 and EWC-5018A
Make short work of removing those old staples with the economically priced Crain Staple Remover. The comfortable handle and curved design add to the ease of use.
5009 Berry Staple Puller
Used for pulling staples out of bed cloth, rail cloth and pockets.
6116 Adjustable Fork Bit
This adjustable fork bit is made especially for replacing or removing antique round head rail bolts.
7005 Cloth Puller
Save some wear and tear on your fingers with this great cloth puller. Really usefull when working with worsted fabrics that do not have much stretch.
2079 Snooker Bends
Set of 12 to match up with K-55 profile rubber.
3011 3.2mm Shaped Cushion Facings
3013 5.5mm Shaped Cushion Facings
Cushion facings are attached to the ends of cushion rubber to firm up the ends of the rubber. They come in sets of 12 ( 8 corner facings and 4 side pocket facings) and are availble in 3.3mm and 5.5mm thickness.
3010 3.2mm Rectangular Cushion Facings
3012 5.5mm Rectangular Cushion Facings
Cushion facings are attached to the ends of cushion rubber to firm up the ends of the rubber. They come in sets of 12 ( 8 corner facings and 4 side pocket facings) and are availble in 3.3mm and 5.5mm thickness.
Cushion Rubber
Various length and grade cushion rubber in U23, K55, K66 and Century profiles
Click here for profile dimensions.
3M Spray Adhesive
9002 74 Foam Fast
9004 76 Hi-Tack
9006 Super 77
9008 90 Hi-Strength
Camie Spray Adhesive
9013 Camie 303 Foam Spray Adhesive
9015 Camie 373 Mist Spray Adhesive
9017 Camie 363 High Tack Spray Adhesive
9019 Camie 393 High Strength Spray Adhesive
9009 3M Scotch-Weld Contact Adhesive
Works great for applying cushion rubber to rails.
9011 Barge Cement
Use for gluing cushion rubber to the wood liner. Comes with applicator brush in the lid.